Skip to main content

Migliore: Biggest Problem in Flooring is Not Understanding Product

Lew Migliore
It never ceases to amaze me that there are people selling floor covering that do not understand the product. This goes for retailers, contract dealers, architects, designers and specifiers.

Having the opportunity to see literally thousands of flooring failures over the last 38 years and still seeing the same thing occur can be very frustrating. A large percentage of the failures have are due to somebody not knowing, and sometimes not caring, whether the flooring material will actually do what is expected of it. Instead it’s more important that it look good or go with the d├ęcor.

Too often a complaint arises within a very short period after installation that creates animosity and pain for all involved. When all is said and done, inevitably the cause of the complaint is that someone didn’t understanding the product, its characteristics and performance aspects. When this happens, it can be said, and often is, that “the product is performing up to the standards and characteristics to which it was designed, engineered and constructed.”

The wrong product in the wrong place is a formula for disaster and, unquestionably, failure. You can’t think something will work and then be surprised when it doesn’t if you really don’t know whether it will or won’t in the first place.

Here are just a few tips to keep you out of trouble.

  • Light colors soil more than dark colors and using a light color in a high traffic area will cause the material to ugly out very quickly. For example, a recent installation on five floors in a corporate environment of a very light colored beige carpet that has coffee, beverage and food spills all over. This carpet will be a maintenance nightmare. It’s brand new, very expensive and was supposed to make a statement.

  • Cut pile carpets will mat and crush and show traffic patterns. If you don’t want the traffic pattern to show you have to sell or specify carpet that is low, dense and loop pile. Cut and Loop Carpet

  • Cut and loop or tip sheared carpet with a high percentage of tip shear will cause the pattern in the carpet to wash out over time. This is a common problem in hospitality carpets. For example, a tip sheared carpet (cut and loop) in the corridors of a new hotel generated a complaint for appearance retention – it didn’t look the way it did when first installed. Tip sheared yarn blossoms to reflect light differently than the adjoining loop creating a contrast pattern. But the tip shear has less resiliency and over time will mat and crush causing the contrast pattern to wash out. This is a common problem I am called to assess in the hospitality industry.

  • Using the wrong fiber will also cause problems. For example, polypropylene has no inherent resiliency; it will mat and crush and it will never come back up. If this type of carpet is sold into a high traffic environment, residential or commercial, you can expect complaints. It has many positive characteristics but resiliency is not one of them.

Remember this - there’s a product that will work for every application; you just have to know what that product is and as flooring industry professionals that is expected of you. If you don’t know or need help call me; we know what will and won’t work, why and what you should use to stay out of trouble. This is not the type of economy where you can afford to make mistakes.

I invite your comments and discuss here or email me at


Lew Migliore is a consultant with the Floor Covering Institute, President of technical consulting firm LGM and Associates, author of “The Claims File” appearing regularly in Floor covering News and the Commercial Flooring Report, a national publication focused on the state of the commercial flooring industry. Some people call Lew the "godfather of claims”.

Technorati Tags:


  1. As usual, you are right on the money. I would add that while uninformed sales reps, designers and architects are often to blame, stubborn customers who won't accept good advice are also a big part of the problem.

    Perhaps that's the silver lining, after a failure perhaps they'll be more apt to seek out true professionals and heed their suggestions.

  2. Lew,

    Good job as always. General rule is the “right horse for the right course”.

    What throws end users off, I think, is the many and various “guarantees” that come with most carpet products. I think that both commercial and residential end users are mesmerized by the stated guarantees and tend to have them trump any personal evaluation of whether the product is the right one for the end use.

    Keep up the good work.



Post a Comment

Popular posts from this blog

Intelligent merchandising in the floor covering showroom

In a ceramic tile and stone showroom the two biggest challenges for customers are  visualizing how the tile or combination of tiles will look installed in the home and determining which tiles are suitable for their intended application. Figuring out how to address these two challenges should be a priority for every showroom.

Along with that, conveying the features, benefits and limitations of the products is the next challenge. And perhaps the most important piece of the showroom puzzle, is to train sales people so they are knowledgeable and competent showroom consultants (I wrote about this previously on the blog in, How Training and E-learning Can Improve ROI).

Years ago, when I was an importer and distributor with several showrooms I coined the term Intelligent Merchandising to represent the approach we developed to help our customers make selections and our sales people more effective in assisting our customers during the selection process. The challenges we faced back then …

Concrete Moisture Leading to Flooring Failures - Is this an Epidemic?

Sheet vinyl  lifting off concrete substrates that looks like blistered skin from a burn, wood flooring turning up at the edges, carpet tiles emitting foul odors from reactions with “wet” slabs.  All of these failures in floor covering occur daily around the country plaguing flooring contractors and end users.  Is this a flooring conspiracy or something more sinister?  Well, it’s not a conspiracy, nothing so colorful as that, and it’s not sinister unless you consider that moisture lurking in the substrates is skulking around waiting to pounce.

What are the reasons for this outbreak of flooring failures?  Have adhesives changed?  Is flooring material different?  Hasn’t concrete been the same for years?  Why is this all happening now?

Adhesives have changed from when solvent carriers were used but adhesives are actually better now.  Flooring products have changed with the onslaught of non-permeable backings which can trap moisture vapor emissions coming from concrete.  Concrete hasn’t ch…

Corporate culture; what does it say about your company?

Culture at a company (corporate culture) is generally developed through the actions of management.  Employees then follow their lead.  “The boss did it this way so it must be the right way.” I share this obvious observation because sometimes leaders do things that ultimately reflect poorly on the company.  This is particularly so during difficult times.

One of the benefits of working with dozens of companies outside the flooring industry is the opportunity to understand their corporate standards and culture by observation.  I recently spoke at a convention for a couple hundred people.  The food was acceptable as you would expect; but the room was dirty and hideous.  The company chose this room because it was the least expensive room available.  The room was so remote and old that most of us didn’t even know that wing of the well-known property existed.  We sat in a dirty room that communicated the company’s own low standards while the corporate president spoke glowingly about their c…